Accessories & Options

包括大支架安装到2 (51mm) IP, 2.375 (60mm) O.D. 榫，用于安装到1的小支架.25 (32mm) IP, 1.66 (42mm) O.D. tenon and mounting bolts. NOTE: Line art on CI379X15R1

适用于70 - 90个LED灯具. 设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

适用于40至60个LED灯具. 设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

适用于20至30个LED灯具. 设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

适用于100至120个LED灯具. 设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

For use with HC and PD mounts only. 设计用于防止鸟类降落或在灯具上筑巢.

用于更换现有的5个螺栓孔圆的护柱.75″ (146mm), white finish

用于更换现有的5个螺栓孔圆的护柱.75″ (146mm), silver finish

Used for replacement of existing bollards; platinum finish

用于更换现有的5个螺栓孔圆的护柱.75″ (146mm), bronze finish

用于更换现有的5个螺栓孔圆的护柱.75″ (146mm), black finish

直接臂杆适配器支架与水平榫安装使用

设计用于防止鸟类降落或在灯具上筑巢.

设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

设计用于防止鸟类降落或在灯具上筑巢.

设计用于控制背光-把光放在你想要的地方，而不是你不需要的地方.

为成功实现极点安装占用传感器, 至少需要一个手持遥控器

安装吊灯时使用

15″ (381mm); Pendant height. 包括两个导管接头和两端螺纹的3/4-14 NPT管. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

11″ (279mm); Pendant height. 包括两个导管接头和两端螺纹的3/4-14 NPT管. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

5″ (127mm); Pendant height. 包括两个导管接头和两端螺纹的3/4-14 NPT管. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

For 0-13 degree sloped ceilings. 用于安装悬挂式灯具.

30″(762毫米)长-安装杆，用于帮助固定灯具到木桁架

22″(559mm)长-安装条，用于帮助将灯具固定在木桁架上

14″(356mm)长-安装条，用于帮助将灯具固定在木桁架上

Kit Includes four brackets

347V – For use with Hook & Cord Mounts

277V – For use with Hook & Cord Mounts

277V – For use with Hook & Cord Mounts

208/240V – For use with Hook & Cord Mounts

208/240V – For use with Hook & Cord Mounts

120V – For use with Hook & Cord Mounts

120V – For use with Hook & Cord Mounts

347V – For use with Hook & Cord Mounts

Spans two 16 deck panels. 金属板，用于更换表面安装的HID灯具. Painted Colorfast DeltaGuard^® white. 野外切割一定要配灯具吗.

Spans two 12 deck panels. 金属板，用于更换表面安装的HID灯具. Painted Colorfast DeltaGuard^® white. 野外切割一定要配灯具吗.

For use with 90 LED count. 用于在升级现有开放式檐篷中的嵌入式HID灯具时，高度小于2-1/2的浅檐篷.

For use with 90 LED count. 在升级现有开放式檐篷中的嵌入式HID灯具时，适用于高度大于2-1/2的檐篷.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 90 LED count. 没有背板的塑料套件，与顶篷一起使用，顶篷有最大7直径的切割孔.

For use with 60 LED count. 用于在升级现有开放式檐篷中的嵌入式HID灯具时，高度小于2-1/2的浅檐篷.

For use with 60 LED count. 在升级现有开放式檐篷中的嵌入式HID灯具时，适用于高度大于2-1/2的檐篷.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 60 LED count. 没有背板的塑料套件，与顶篷一起使用，顶篷有最大7直径的切割孔.

For use with 30 LED count. 用于在升级现有开放式檐篷中的嵌入式HID灯具时，高度小于2-1/2的浅檐篷.

For use with 30 LED count. 在升级现有开放式檐篷中的嵌入式HID灯具时，适用于高度大于2-1/2的檐篷.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 12 diameter or 12 x 12 cut hole; 16-inch deck.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 10 diameter or 10 x 10 cut hole; 12-inch deck.

For use with 30 LED count. 没有背板的塑料套件，与顶篷一起使用，顶篷有最大7直径的切割孔.

用于直接将灯具安装到固体表面.

22 (559mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

18 (457mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

12 (305mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

用于LSI里士满或怀特威市民灯具在现有的嵌入式(矩形)顶棚. 23.00″ L x 13.00″ W, 18 ga. Steel

用于Elsco Merrit灯具在现有2×2箱檐. 18.06″ square, 18 ga. Steel

用于Whiteway Riviera或Rig-A-Lite灯具在现有2×2箱檐. 20.60″ square, 18 ga. Steel

用于与LSI达科他或大师灯具在现有2×2箱檐. 22.50″ square, 18 ga. Steel

用于Elsco方济会灯具在现有2×2箱檐. 22.06″ square, 18 ga. steel

与Jet-Philips灯具在现有2×2箱顶篷中使用. 21.60″ square, 18 ga. steel

6.0″(152mm) H × 3/4″(19mm) NPT阀杆. Watertight. 额定馈入通过8 (4 in, 4 out) #12 AWC导体

Beauty Plate only (26-inch square). Used to enhance aesthetic appeal. 18 ga. Steel.

Beauty plate (18 ga. 钢)w/16″(406mm)背板(16 ga. steel). 用于甲板开口大于安装CPY250灯具所需的檐篷. 甲板最大开口12″x 15″(305mm x 375mm).

Beauty plate (18 ga. 钢)w/16″(406mm)背板(16 ga. steel). 用于甲板开口大于安装CPY250灯具所需的檐篷. Maximum deck opening 10.75″ x 15″ (183mm x 375mm).

设计用于防止鸟类降落或在灯具上筑巢.

设计用于防止鸟类降落或在灯具上筑巢.

For use with LEDway housings. 设计用于防止鸟类降落或在灯具上筑巢.

适用于70至90个LED光引擎. 设计用于防止鸟类降落或在灯具上筑巢.

适用于40至60个LED光引擎. 设计用于防止鸟类降落或在灯具上筑巢.

适用于20至30个LED光引擎. 设计用于防止鸟类降落或在灯具上筑巢.

适用于100至120个LED光引擎. 设计用于防止鸟类降落或在灯具上筑巢.

设计用于防止鸟类降落或在灯具上筑巢.

扩展l形表面支架(用于可调节手臂) & Horizontal/Vertical Tenon Mounts)

l形表面支架(用于可调臂) & Horizontal/Vertical Tenon Mounts)

扩展水平表面支架(用于可调节臂) & Horizontal/Vertical Tenon Mounts)

水平表面支架(用于可调节臂) & Horizontal/Vertical Tenon Mounts)

设计用于防止鸟类降落或在灯具上筑巢.

Must specify finish color. Not available with JB mount.

Round Steel Poles

For use with Hook & Cord Mounts. Steady Lock for eyebolt.

双中极安装支架(用于可调节臂) & Horizontal/Vertical Tenon Mount). 注意:不适用于Cree Edge™高输出区/泛光灯具.